[OpsMgr 2007 R2][OpsMgr 2012] Running Operations Manager reports fail with "System.ArgumentOutOfRangeException" error

Article ID: 2836388 - View products that this article applies to.

Article ID: 2836388

Symptoms

When running reports using the Operations Manager console, the report fails with the error message below:

Date: <date-time>
Application: Operations Manager
Application Version: 7.0.9538.0
Severity: Error
Message: Cannot execute report.
System.ArgumentOutOfRangeException: Value of '0001-01-01 12:00:00 AM' is not valid for 'Value'. 'Value' should be between 'MinDate' and 'MaxDate'.
Parameter name: Value
   at System.Windows.Forms.DateTimePicker.set_Value(DateTime value)
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Reporting.Parameters.Controls.RelativeDateTimePicker.LoadRelativeDateValues(ComboBox dateEditor, DateTimePicker timeEditor, ReportParameterInfo dateBaseTypeParameter, ReportParameterInfo dateBaseValueParameter, ReportParameterInfo dateOffsetTypeParameter, ReportParameterInfo dateOffsetValueParameter)
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Reporting.Parameters.Controls.RelativeDateTimePicker.LoadValues(ReportParameterInfoCollection reportParameters)
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Reporting.Parameters.Controls.RelativeDateTimeBusinessPicker.LoadValues(ReportParameterInfoCollection reportParameters)
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Reporting.Parameters.ReportParameterBlock.LoadValues()
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Console.ReportForm.OnRenderingCompleteJob(Object sender, ConsoleJobEventArgs args)

Cause

This issue can occur if there is a custom Short DateTime format being used on the console server.

For example, say the system locale on the Operations console server is ENC and the default short DateTime format for ENC locale is dd/MM/yyyy. If this short DateTime format is changed from dd/MM/yyyy to a different format such as yyyy-MM-dd, the error above may occur.

Resolution

To resolve this issue, set the short DateTime format to the system locale's default value.

More information

Custom DateTime formats are not supported with System Center Operations Manager reporting.

Note This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. The information contained herein is provided as-is in response to emerging issues. As a result of the speed in making it available, the materials may include typographical errors and may be revised at any time without notice. See Terms of Use for other considerations.

Properties

Article ID: 2836388 - Last Review: April 18, 2013 - Revision: 1.0
Applies to
Microsoft System Center 2012 Operations Manager Service Pack 1
Microsoft System Center 2012 Operations Manager
Microsoft System Center Operations Manager 2007 R2
Microsoft System Center Operations Manager 2007 Service Pack 1
Microsoft System Center Operations Manager 2007

This posting is provided "AS IS" with no warranties.

[OpsMgr 2007 R2] Columns may be missing in Monitoring views after installing the SQL 2012 Management Pack in Operations Manager 2007 R2

Article ID: 2809231 - Last Review: January 28, 2013 - Revision: 1.1

 

Columns may be missing in Monitoring views after installing the SQL 2012 Management Pack in Operations Manager 2007 R2

 

Microsoft Article ID: 2809231

   Summary

After installing the SQL Management Pack version 6.3.173.1 in System Center Operations Manager 2007 R2, you will see default columns selected in the monitoring views for the new SQL 2012 components.

However, if you upgrade to this Management Pack from an earlier version without removing the old one first, the columns will remain unchanged from your previous view settings.

This is by design, although you can go to Personalize View under Actions and check the desired columns to display.

  More information

This behavior may also occur with other Management Packs.

 

Note This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. The information contained herein is provided as-is in response to emerging issues. As a result of the speed in making it available, the materials may include typographical errors and may be revised at any time without notice. See Terms of Use for other considerations.

  Properties

Article ID: 2809231 - Last Review: January 28, 2013 - Revision: 1.1

Applies to

• Microsoft System Center Operations Manager 2007 R2

Keywords:

KB2809231

This posting is provided "AS IS" with no warranties.

Windows 2012 server Updates and Security Patches

I'll try to summarize here all updates and security patches that have been released for Windows Server 2012 :

 

Update	2/25/2013	Update for Windows Server 2012 (KB2794599)	Install this update to resolve issues in Windows.
Update	2/22/2013	Update for Internet Explorer Flash Player for Windows Server 2012 (KB2819372)	This update addresses the vulnerability discussed in Microsoft Security Advisory (KB2819372).To find out if other security updates are available for you, see the Additional Information section at the bottom of this page.
Update	12/20/2012	Update for Windows Server 2012 (KB2792476)	Install this update to resolve a set of known application compatibility issues with Windows.
Security Update	12/20/2012	Security Update for Windows Server 2012 (KB2753842)	A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and gain control over it.
Update	11/26/2012	Update for Windows Server 2012 (KB2764462)	Install this update to resolve a set of known application compatibility issues with Windows.
Update	11/26/2012	Update for Windows Server 2012 (KB2779562)	Install this update to resolve issues caused by revised daylight saving time and time zone laws in several countries.
Update	11/26/2012	Update for Windows Server 2012 (KB2758246)	Install this update to resolve issues in Windows.
Update	10/22/2012	Update for Windows Server 2012 (KB2770816)	Install this update to resolve issues in Windows.
Update	1/21/2013	Update for Windows Server 2012 (KB2794119)	Install this update to resolve issues in Windows.
Update	1/21/2013	Update for Windows Server 2012 (KB2803748)	Install this update to resolve issues in Windows.
Update	1/18/2013	Update for Windows Server 2012 (KB2795719)	Install this update to resolve issues in Windows.
Update	03/11/2013	Update for Windows Server 2012 (KB2790907)	Install this update to resolve a set of known application compatibility issues with Windows.
Update	03/11/2013	Update for Windows Server 2012 (KB2812822)	Install this update to resolve issues in Windows.
Update	03/11/2013	Update for Windows Server 2012 (KB2811660)	These updates (*.msu) provide a collection of performance and reliability improvements that are designed to improve the Windows Server 2012 experience.
Security Update	03/11/2013	Security Update for Windows Server 2012 (KB2807986)	A security issue has been identified that could allow an authenticated local attacker to compromise your system and gain control over it.
Update	02/11/2013	Update for Windows Server 2012 (KB2795944)	These updates (*.msu) provide a collection of performance and reliability improvements that are designed to improve the Windows Server 2012 experience.
Update	02/11/2013	Update for Windows Server 2012 (KB2793210)	Install this update to resolve a set of known application compatibility issues with Windows.
Update	02/11/2013	Update for Internet Explorer Flash Player for Windows Server 2012 (KB2805940)	This update addresses the vulnerability discussed in Microsoft Security Advisory (KB2805940).To find out if other security updates are available for you, see the Additional Information section at the bottom of this page.
Security Update	02/11/2013	Security Update for Microsoft .NET Framework 3.5 on Windows 8 and Windows Server 2012	A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and gain control over it.
Security Update	02/11/2013	Security Update for Microsoft .NET Framework 4.5 on Windows 8, Windows RT and Windows Server 2012	A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and gain control over it.
Security Update	02/11/2013	Security Update for Windows Server 2012 (KB2790978)	A security issue has been identified that could allow an authenticated remote attacker to cause the affected system to stop responding.
Security Update	02/11/2013	Security Update for Windows Server 2012 (KB2778344)	A security issue has been identified that could allow an authenticated local attacker to compromise your system and gain control over it.
Security Update	02/11/2013	Security Update for Windows Server 2012 (KB2790655)	A security issue has been identified that could allow an unauthenticated remote attacker to cause the affected system to stop responding.
Security Update	02/11/2013	Security Update for Windows Server 2012 (KB2799494)	A security issue has been identified that could allow an authenticated local attacker to compromise your system and gain control over it.
Update	04/08/2013	Update for Windows Server 2012 (KB2800033)	Install this update to resolve issues in Windows.
Update	04/08/2013	Update for Windows Server 2012 (KB2822241)	These updates (*.msu) provide a collection of performance and reliability improvements that are designed to improve the Windows Server 2012 experience.
Security Update	04/08/2013	Security Update for Windows Server 2012 (KB2772930)	A security issue has been identified in a Microsoft software product that could affect your system.
Security Update	04/08/2013	Security Update for Windows Server 2012 (KB2808735)	A security issue has been identified in a Microsoft software product that could affect your system.
Security Update	04/08/2013	Security Update for Windows Server 2012 (KB2813170)	A security issue has been identified in a Microsoft software product that could affect your system.
Update	03/08/2013	Update for Internet Explorer Flash Player for Windows Server 2012 (KB2824670)	This update addresses the vulnerability discussed in Microsoft Security Advisory (KB2824670).To find out if other security updates are available for you, see the Additional Information section at the bottom of this page.
Security Update	03/08/2013	Cumulative Security Update for Internet Explorer 10 in Windows Server 2012 x64 Edition (KB2809289)	This update addresses the vulnerability discussed in Microsoft Security Bulletin MS13-021. To find out if other security updates are available for you, see the Additional Information section at the bottom of this page.
Security Update	02/08/2013	Security Update for Internet Explorer 10 for Windows Server 2012 x64 Edition (KB2797052)	A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and gain control over it.
Security Update	02/08/2013	Cumulative Security Update for Internet Explorer 10 in Windows Server 2012 x64 Edition (KB2792100)	This update addresses the vulnerability discussed in Microsoft Security Bulletin MS13-009. To find out if other security updates are available for you, see the Additional Information section at the bottom of this page.
Update	01/07/2013	Update for .NET Framework 4.5 for Windows 8, Windows RT and Windows Server 2012 - KB2750149	Update for .NET Framework 4.5 for Windows 8, Windows RT and Windows Server 2012 - KB2750149
Update	01/07/2013	Update for Windows Server 2012 (KB2785094)	These updates (*.msu) provide a collection of performance and reliability improvements that are designed to improve the Windows Server 2012 experience.
Security Update	01/07/2013	Security Update for Microsoft .NET Framework 4.5 on Windows 8, Windows RT and Windows Server 2012	A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and gain control over it.
Security Update	01/07/2013	Security Update for Microsoft .NET Framework 3.5 on Windows 8 and Windows Server 2012	A security issue has been identified that could allow an unauthenticated remote attacker to cause the affected application to stop responding.
Security Update	01/07/2013	Security Update for Microsoft .NET Framework 3.5 on Windows 8 and Windows Server 2012	A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and gain control over it.
Security Update	01/07/2013	Security Update for Microsoft .NET Framework 3.5 on Windows 8 and Windows Server 2012	A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and gain control over it.
Security Update	01/07/2013	Security Update for Windows Server 2012 (KB2757638)	A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and gain control over it.
Security Update	01/07/2013	Security Update for Windows Server 2012 (KB2753596)	A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and gain control over it.
Security Update	01/07/2013	Security Update for Windows Server 2012 (KB2778930)	A security issue has been identified that could allow an authenticated local attacker to compromise your system and gain control over it.
Security Update	01/07/2013	Security Update for Windows Server 2012 (KB2785220)	A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and gain access to information.
Update	04/05/2013	Update for Internet Explorer Flash Player for Windows Server 2012 (KB2833510)	This update addresses the vulnerability discussed in Microsoft Security Advisory (KB2833510).To find out if other security updates are available for you, see the Additional Information section at the bottom of this page.
Security Update	04/05/2013	Cumulative Security Update for Internet Explorer 10 in Windows Server 2012 x64 Edition (KB2817183)	This update addresses the vulnerability discussed in Microsoft Security Bulletin MS13-028. To find out if other security updates are available for you, see the Additional Information section at the bottom of this page.
Update	02/05/2013	Update for Internet Explorer Flash Player for Windows Server 2012 (KB2811522)	This update addresses the vulnerability discussed in Microsoft Security Advisory (KB2811522).To find out if other security updates are available for you, see the Additional Information section at the bottom of this page.
Update	01/04/2013	Update for Internet Explorer Flash Player for Windows Server 2012 (KB2796096)	This update addresses the vulnerability discussed in Microsoft Security Advisory (KB2796096).To find out if other security updates are available for you, see the Additional Information section at the bottom of this page.
Update	01/02/2013	Update for Windows 8, Windows Server 2012 (KB2798897)	Install this update to resolve an issue which requires an update to the untrusted certificate store on Windows systems and to keep your systems up to date.
Update	11/12/2012	Update for Windows Server 2012 (KB2769034)	Install this update to resolve issues in Windows.
Update	11/12/2012	Update for Windows Server 2012 (KB2769165)	Install this update to resolve issues in Windows.
Update	11/12/2012	Update for Windows Server 2012 (KB2770917)	These updates (*.msu) provide a collection of performance and reliability improvements that are designed to improve the Windows Server 2012 experience.
Security Update	11/12/2012	Security Update for Microsoft .NET Framework 4.5 on Windows 8 Release Preview, Windows RT Release Preview and Windows Server 2012 Release Candidate	A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and gain control over it.
Security Update	11/12/2012	Security Update for Microsoft .NET Framework 3.5 on Windows 8 and Windows Server 2012	A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and gain control over it.
Security Update	11/12/2012	Security Update for Microsoft .NET Framework 4.5 on Windows 8 Release Preview, Windows RT Release Preview and Windows Server 2012 Release Candidate	A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and gain control over it.
Security Update	11/12/2012	Security Update for Microsoft .NET Framework 4.5 on Windows 8, Windows RT and Windows Server 2012	A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and gain control over it.
Security Update	11/12/2012	Security Update for Microsoft .NET Framework 3.5 on Windows 8 Release Preview and Windows Server 2012 Release Candidate	A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and gain control over it.
Security Update	11/12/2012	Security Update for Windows Server 2012 (KB2727528)	A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and gain control over it.
Security Update	11/12/2012	Security Update for Windows Server 2012 (KB2761226)	A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and gain control over it.
Update	10/11/2012	Update for Windows Server 2012 (KB2768703)	Install this update to resolve issues in Windows.
Update	09/11/2012	Update for Windows Server 2012 (KB2751352)	Install this update to resolve issues in Windows.
Update	12/10/2012	Update for Windows Server 2012 (KB2779768)	These updates (*.msu) provide a collection of performance and reliability improvements that are designed to improve the Windows Server 2012 experience.
Update	12/10/2012	Update for Internet Explorer Flash Player for Windows Server 2012 Release Candidate (KB2785605)	This update addresses the vulnerability discussed in Microsoft Security Advisory (KB2785605). To find out if other security updates are available for you, see the Additional Information section at the bottom of this page.
Update	12/10/2012	Update for Windows Server 2012 (KB2780541)	Install this update to resolve issues in Windows.
Update	12/10/2012	Update for Internet Explorer Flash Player for Windows Server 2012 (KB2785605)	This update addresses the vulnerability discussed in Microsoft Security Advisory (KB2785605).To find out if other security updates are available for you, see the Additional Information section at the bottom of this page.
Update	12/10/2012	Update for Windows Server 2012 (KB2783122)	Install this update to resolve issues in Windows.
Security Update	12/10/2012	Security Update for Windows Server 2012 (KB2779030)	A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and gain control over it.
Security Update	12/10/2012	Security Update for Windows Server 2012 (KB2765809)	A security issue has been identified that could allow an attacker to break or bypass a security feature in the affected software.
Security Update	12/10/2012	Security Update for Windows Server 2012 (KB2770660)	A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and gain control over it.
Update	10/10/2012	Update for Windows Server 2012 (KB2756872)	These updates (*.msu) provide a collection of performance and reliability improvements that are designed to improve the Windows Server 2012 experience.
Security Update	12/07/2012	Cumulative Security Update for Internet Explorer 10 in Windows Server 2012 x64 Edition (KB2761465)	This update addresses the vulnerability discussed in Microsoft Security Bulletin MS12-077. To find out if other security updates are available for you, see the Additional Information section at the bottom of this page.
Security Update	12/07/2012	Cumulative Security Update for Internet Explorer 10 in Windows Server 2012 x64 Edition (KB2761465)	This update addresses the vulnerability discussed in Microsoft Security Bulletin MS12-077. To find out if other security updates are available for you, see the Additional Information section at the bottom of this page.
Update	10/07/2012	Update for Internet Explorer Flash Player for Windows Server 2012 Release Candidate (KB2758994)	This update addresses the vulnerability discussed in Microsoft Security Advisory (KB2758994). To find out if other security updates are available for you, see the Additional Information section at the bottom of this page.
Update	10/07/2012	Update for Internet Explorer Flash Player for Windows Server 2012 (KB2758994)	This update addresses the vulnerability discussed in Microsoft Security Advisory (KB2758994). To find out if other security updates are available for you, see the Additional Information section at the bottom of this page.
Update	11/05/2012	Update for Internet Explorer Flash Player for Windows Server 2012 Release Candidate (KB2770041)	This update addresses the vulnerability discussed in Microsoft Security Advisory (KB2770041). To find out if other security updates are available for you, see the Additional Information section at the bottom of this page.
Update	11/05/2012	Update for Internet Explorer Flash Player for Windows Server 2012 (KB2770041)	This update addresses the vulnerability discussed in Microsoft Security Advisory (KB2770041).To find out if other security updates are available for you, see the Additional Information section at the bottom of this page.
Update	12/04/2012	Update for Windows Server 2012 (KB2771431)	Install this update to resolve issues in Windows.

This posting is provided "AS IS" with no warranties.

[OpsMgr 2012] Reports are not populated in the System Center 2012 Operations Manager Reporting Pane

Reports are not populated in the System Center 2012 Operations Manager Reporting Pane

 

Article ID: 2771934

Symptoms

Reports do not populate in the System Center 2012 Operations Manager Reporting Pane, or Report data does not seem to be updating.

 

Cause

This can occur if the Data Warehouse Synchronization server entry is deleted.

 

Resolution

To confirm this issue in the Operations Console, go to the Monitoring View and click on discovered inventory. Then change the Target type to Data Warehouse Synchronization server by completing the following:

1. Click Change Target Type on the right-hand task pane of the Operations Console
2. In the dialog that opens select View all targets
3. Locate and select Data Warehouse Synchronization Server in the list
4. Click OK

If this returns blank you are experiencing this issue.

To resolve the issue run the script below:

Note: You will have to edit the script and enter the Operations Manager Database server name, Data Warehouse servername and console path in the script . This is a PowerShell script which needs to copied to text and rename to .ps1 after entering the required information to run under PowerShell.


======

#Populate these fields with Operational Database and Data Warehouse Information

#Note: change these values appropriately
$OperationalDbSqlServerInstance = "<OpsMgrDB server instance. If its default instance, only server name is required>"
$OperationalDbDatabaseName = "OperationsManager"
$DataWarehouseSqlServerInstance = "<OpsMgrDW server instance. If its default instance, only server name is required>"
$DataWarehouseDatabaseName = "OperationsManagerDW"

$ConsoleDirectory = "<OpsMgr Console Location by default it will be C:\Program Files\System Center 2012\Operations Manager\Console"

##########################################

$dataWarehouseClass = get-SCOMClass -name:Microsoft.SystemCenter.DataWarehouse
$seviewerClass = get-SCOMClass -name:Microsoft.SystemCenter.OpsMgrDB.AppMonitoring
$advisorClass = get-SCOMClass -name:Microsoft.SystemCenter.DataWarehouse.AppMonitoring

$dwInstance = $dataWarehouseClass | Get-SCOMClassInstance
$seviewerInstance = $seviewerClass | Get-SCOMClassInstance
$advisorInstance = $advisorClass | Get-SCOMClassInstance

#Update the singleton property values
$dwInstance.Item($dataWarehouseClass.Item("MainDatabaseServerName")).Value = $DataWarehouseSqlServerInstance
$dwInstance.Item($dataWarehouseClass.Item("MainDatabaseName")).Value = $DataWarehouseDatabaseName

$seviewerInstance.Item($seviewerClass.item("MainDatabaseServerName")).Value = $OperationalDbSqlServerInstance
$seviewerInstance.Item($seviewerClass.item("MainDatabaseName")).Value = $OperationalDbDatabaseName

$advisorInstance.Item($advisorClass.item("MainDatabaseServerName")).Value = $DataWarehouseSqlServerInstance
$advisorInstance.Item($advisorClass.item("MainDatabaseName")).Value = $DataWarehouseDatabaseName

$dataWarehouseSynchronizationServiceClass = get-SCOMClass -name:Microsoft.SystemCenter.DataWarehouseSynchronizationService
#$dataWarehouseSynchronizationServiceInstance = $dataWarehouseSynchronizationServiceClass | Get-SCOMClassInstance

$mg = New-Object Microsoft.EnterpriseManagement.ManagementGroup -ArgumentList localhost
$dataWarehouseSynchronizationServiceInstance = New-Object Microsoft.EnterpriseManagement.Common.CreatableEnterpriseManagementObject -ArgumentList $mg,$dataWarehouseSynchronizationServiceClass

$dataWarehouseSynchronizationServiceInstance.Item($dataWarehouseSynchronizationServiceClass.Item("Id")).Value = [guid]::NewGuid().ToString()

#Add the properties to discovery data
$discoveryData = new-object Microsoft.EnterpriseManagement.ConnectorFramework.IncrementalDiscoveryData

$discoveryData.Add($dwInstance)
$discoveryData.Add($dataWarehouseSynchronizationServiceInstance)
$discoveryData.Add($seviewerInstance)
$discoveryData.Add($advisorInstance)

#$connector = Get-ScomConnector -name:"Operations Manager Internal Connector"
$momConnectorId = New-Object System.Guid("7431E155-3D9E-4724-895E-C03BA951A352")
$connector = $mg.ConnectorFramework.GetConnector($momConnectorId)

$discoveryData.Overwrite($connector)

#Update Global Settings. Needs to be done with PS V1 cmdlets
Add-pssnapin microsoft.enterprisemanagement.operationsmanager.client

cd $ConsoleDirectory

.\Microsoft.EnterpriseManagement.OperationsManager.ClientShell.NonInteractiveStartup.ps1

Set-DefaultSetting ManagementGroup\DataWarehouse\DataWarehouseDatabaseName $DataWarehouseDatabaseName
Set-DefaultSetting ManagementGroup\DataWarehouse\DataWarehouseServerName $DataWarehouseSqlServerInstance

======

 

More information

If the script completes successfully you should see a message like below:

PS C:\> .\AddDWInstance.ps1

Name  : ManagementGroup\DataWarehouse\DataWarehouseDatabaseName
Value : OperationsManagerDW
Name  : ManagementGroup\DataWarehouse\DataWarehouseServerName
Value : scsqlv

 

Note This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. The information contained herein is provided as-is in response to emerging issues. As a result of the speed in making it available, the materials may include typographical errors and may be revised at any time without notice. See Terms of Use

(http://go.microsoft.com/fwlink/?LinkId=151500)

for other considerations.

 

Properties

Article ID: 2771934 - Last Review: October 23, 2012 - Revision: 1.0

Applies to

• Microsoft System Center 2012 Operations Manager

 

 

This posting is provided "AS IS" with no warranties.

[OpsMgr 2012] Support Diagnostique Tool 3 - System Center 2012 Operations Manager Diagnostic

System Center 2012 Operations Manager Diagnostic

Article ID: 2793256

The System Center Operations Manager Diagnostics is designed to collect information to help troubleshoot most Operations Manager 2012 problems.

 

More information

This article describes the information that may be collected from a machine when running the System Center 2012 Operations Manager Diagnostics.

This diagnostic package should only be run on a management server in the System Center 2012 Operations Manager management group. It will not provide diagnostic results if it is run on an agent managed machine.


Information Collected

Operating System Information

Collapse this tableExpand this table

Description	File Name
SystemInfo.exe Output	{ComputerName}_SysInfo.txt
TaskList.exe Output	{ComputerName}_TaskList.txt
Status of All Services	{ComputerName}_Services.txt
Resultant Set of Policy Information – txt and htm formats	{ComputerName}_GPResult.*
Installed Updates and Hotfixes – csv, htm, and txt formats	{ComputerName}_Hotfixes.*
MSInfo32 Output	{ComputerName}_MSInfo.nfo
Operating System Information Summary	{ComputerName}_OS_Summary.txt

Event Logs

Collapse this tableExpand this

table

Description	File Name
Application Log – csv, evtx, and txt formats	{ComputerName}_evt_Application.*
System – csv, evtx, and txt formats	{ComputerName}_evt_System.*
Operations Manager – csv, evtx, and txt formats	{ComputerName}_evt_OperationsManager.*

Operations Manager Management Group Information

Collapse this tableExpand this table

Description	File Name
Management Group Topology	{ComputerName}_MGTopology.txt
Active Alert Information – csv and txt format	{ComputerName}_AlertInfo.*
Event Collection Information– csv and txt format	{ComputerName}_EventInfo.*
Installed Server Roles	{ComputerName}_OpsMgrStatus.txt
Operational database grooming Settings	{ComputerName}_OperationsManagerDB_GroomingSettings.txt

Operations Manager SQL Database Information

Collapse this tableExpand this table

Description	File Name
Output of SP_WHO2	{ComputerName}_sp_who2.txt
Output of DBCC SHOW CONTIG	{ComputerName}_ShowContig.txt
Table sizes for tables in the Operational database	{ComputerName}_OperationsDB_TableSizes.csv
Table sizes for tables in the Data Warehouse database	{ComputerName}_DW_TableSizes.csv
Database Role members – csv and txt format	{ComputerName}_DB Role Members.*
Output of __MOMManagement GroupInfo__ Table	__MOMManagementGroupInfo__.csv

*SQL Server information is collected remotely from the Management Server from which the SDP manifest is executed.

Operations Manager Logs

Collapse this tableExpand this table

Description	File Name
APM Provider Log	TracingGuidsAPM.log
Data Access Provider log	TracingGuidsBID.log
Resource Pool Failover Provider log	TracingGuidsFailover.log
Managed Code Provider log	TracingGuidsManaged.log
Native Health Service Provider log	TracingGuidsNative.log
Script Provider tracing log	TracingGuidsScript.log
Operations Manager UI provider log	TracingGuidsUI.log

References
KB 973559 - Frequently asked questions about the Microsoft Support Diagnostic Tool (MSDT) for Windows 7 http://support.microsoft.com/kb/973559  (http://support.microsoft.com/kb/973559)

 

Note This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. The information contained herein is provided as-is in response to emerging issues. As a result of the speed in making it available, the materials may include typographical errors and may be revised at any time without notice. See Terms of Use

(http://go.microsoft.com/fwlink/?LinkId=151500)

for other considerations.

 

Properties

Article ID: 2793256 - Last Review: December 13, 2012 - Revision: 3.0

Applies to

• Microsoft System Center 2012 Operations Manager

Keywords:

KB2793256



This posting is provided "AS IS" with no warranties.

[Orchestrator] Orchestrator does not reconnect when the SQL server is restarted

Runbooks stop executing and the Orchestrator Runbook Service and Management Server do not function as expected when the SQL Server instance that hosts the Orchestrator database is restarted. Errors are expected to occur during the downtime of the SQL Server, however proper connectivity and behavior does not restore once the SQL Server instance has restarted.

KB Article

When the problem is occurring, the following events are logged to Orchestrator's Event window:

The Orchestrator Runbook Service on <server name> is no longer running. Verify the status of the Runbook Server and try to restart Orchestrator Runbook Service. If the problem persists, contact Technical Support.

and

The Runbook Server is suspended because the product license expired.

Cause

The Orchestrator services must be restarted in order for normal behavior to be restored. Microsoft has determined this is an issue in System Center 2012 Orchestrator.

 

Resolution

A fix is scheduled to be available in an upcoming update for System Center. Please contact Microsoft Technical Support for more details. 

Note This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. The information contained herein is provided as-is in response to emerging issues. As a result of the speed in making it available, the materials may include typographical errors and may be revised at any time without notice. See Terms of Use (http://go.microsoft.com/fwlink/?LinkId=151500) for other considerations.

This posting is provided "AS IS" with no warranties.

[OpsMgr 2007 R2] Attempting to access the Operations Manager Web Console fails and Event 33857 is recorded

This Knowledge Base article talks about an issue where you are unable to access the Operations Manager 2007 Web Console and Event 33857 is recorded in the Operations Manager event log:

Read full Article here

Symptoms

Consider the following scenario:
- You are unable to access the Operations Manager 2007 Web Console
- Event 33857 is recorded in the Operations Manager event log:

Log Name: operations manager Source: Health Service Modules Date: <date> Event ID: 33857 Task Category: None Level: Error Keywords: Classic User: N/A Computer: webconsoleserver.contoso.com Description: Failed to retrieve the state of the following site: 'Operations Manager 2007 WebConsole'. The operation will be retried.

HRESULT: 0x800710d8
Details: The object identifier does not represent a valid object.
One or more workflows were affected by this.
Workflow name: Microsoft.Windows.InternetInformationServices.2008.WebSite.WebSiteStatusCheck.Monitor
Instance name: Operations Manager 2007 WebConsole
Instance ID: {CEE899C4-4FD5-AD3B-AE4F-307F2871E1E0}
Management group: group
Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

Cause

This can occur if the services for the Web Server role have been modified or reinstalled once the Operations Manager Web Console has been installed. If one of the components below is modified the Web Console may stop functioning:
• HTTP Redirection
• ASP.NET and additional roles
• ASP
• Basic Authentication (if using Forms Based auth and SSL)
• Windows Authentication (if using Windows account authorization)
• IIS 6 Management Compatibility and/or sub-roles

Resolution

To resolve this issue, remove the Operations Manager Web Console from the Server and reinstall any component required for the Web Server role for the Operations Manager Web Console. Once the Web Server prerequisites have been installed, you can reinstall the Operations Manager Web Console.

This posting is provided "AS IS" with no warranties.

[OpsMgr 2012] Operations Manager integration with System Center 2012 Virtual Machine Manager fails with error 10218

When creating the integration from System Center 2012 Virtual Machine Manager (SCVMM 2012) to Operations Manager, the integration fails with the following error :

Error (10218) Setup could not import the System Center Virtual Machine Manager Management Pack into Operations Manager server because one or more required management packs are missing. The SCVMM Management Packs cannot be deployed unless the following component management packs are present in Operations Manager 2007:
Windows Server Internet Information Services 2003,
Windows Server 2008 Internet Information Services 7,
Windows Server Internet Information Services Library,
SQL Server Core Library.

NOTE All required Management Packs have been imported in Operations Manager.

Read Microsoft Article ID: 2674625

In this scenario, the Virtual Server 2005 R2 Management Pack was imported which imports the Microsoft Virtualization Core Library. The cause of the problem is that SCVMM 2012 will import a newer version of the Microsoft Virtualization Core Library Management Pack and the old version cannot be present in order for integration to complete successfully.



There are two potential solutions:

• Remove the old version of the Microsoft Virtualization Core Library and the Microsoft Virtual Server 2005 R2 Management Pack.

or

• Configure a second Operations Management group for the SCVMM 2012 integration and configure the SCVMM 2012 server as well as the Hyper-V servers to report to this new management group.  

The Microsoft Virtualization Core Library is a Hyper-V Management Pack developed by the Hyper-V team. It has been updated to support the latest version of Hyper-v and improve monitoring of the hosts.

This posting is provided "AS IS" with no warranties.